From spec sheet to apparatus floor.
Triton EVS fabricates fully custom rescues, tankers, mini pumpers, and wildland apparatus in-house — and configures Seagrave-built pumpers and aerials to your department's exact spec.
In-House
Body & compartment fabrication
NFPA 1901
Acceptance certified
CAD
Spec & layout rendering
On-Site
Delivery + training included
Purpose Built Fire and Rescue Apparatus.
Custom Triton-built rescues, tankers, mini pumpers, brush trucks, and specialty apparatus — plus the features and craftsmanship details that go into every build.
-
Mini Pumpers F-550 Mini · 1,750 GPM
High-flow 1,750 GPM mini pumper on a Ford F-550 crew-cab chassis, delivering pump capacity that rivals full-size engines in a footprint that fits any station bay.
- 1,750 GPM pump
- Crew cab seating
- Stainless steel body
- Polished diamond plate
- Pre-piped pump panel
Chassis: Ford F-550 4x4 crew cab
-
Mini Pumpers F-550 Quick Attack
Quick-attack mini pumper on a Ford F-550 4x4 with roll-up compartments and a diamond-plate top deck, built for fast initial response on tight neighborhood streets.
- Roll-up compartmentation
- Diamond plate top deck
- NFPA chevron rear
- Pre-connected attack lines
- Compact footprint
Chassis: Ford F-550 4x4
-
Rescues Walk-Around Rescue
Custom walk-around rescue body on a heavy-duty 4x4 commercial chassis, with compartmentation laid out tool-by-tool around the department’s actual extrication and technical-rescue inventory.
- Walk-around body design
- Roll-up compartmentation
- Custom stripe & graphics
- Tool-by-tool layout
- NFPA chevron rear
Chassis: Heavy-duty commercial 4x4
-
Pumpers Kenworth Tandem Pumper
3,000 Gallon Pumper/Tanker
3,000-gallon tandem-axle dry-side pumper/tanker featuring a 1500 GPM Mac 1 midship pump, full hose bed, pre-piped deluge riser, and stainless steel swivel dump valve. Custom heavy-duty aluminum body with a full LED warning light package.
- 1500 GPM Mac 1 midship pump
- Pre-piped deluge riser
- Stainless swivel dump valve
- Heavy-duty aluminum body
- LED warning package
Chassis: Kenworth tandem-axle
-
Tankers Freightliner Pumper-Tanker
2,000 Gallon Pumper-Tanker
2,000-gallon wet-side pumper-tanker featuring a Hale 1250 GPM G-Flo pump with deluge riser. Available on your choice of Kenworth, Peterbilt, or Freightliner chassis. Rear booster reel, stainless steel swivel dump, and a large hose bed.
- Hale 1250 GPM G-Flo pump
- Deluge riser
- Rear booster reel
- Stainless swivel dump
- Large hose bed
Chassis: Kenworth · Peterbilt · Freightliner
-
Tankers Freightliner Rear-Discharge Tanker
3,000 Gallon Dry-Side Tanker
3,000-gallon tandem-axle dry-side tanker with a stainless steel swivel dump valve, NFPA chevron rear, 1500 GPM Hale Q-Max pump, deluge riser, and Zico fold-a-tank storage system. Built so rural departments can deliver high flow with a substantial water supply.
- 1500 GPM Hale Q-Max pump
- Stainless swivel dump valve
- Deluge riser
- Zico fold-a-tank storage
- NFPA chevron rear
Chassis: Freightliner tandem-axle
-
Tankers Kenworth T380 Tanker
3,000 Gallon Wet-Side Tanker
High-capacity 3,000-gallon poly wet-side water tanker on a Kenworth T380 tandem-axle chassis. Hale pump with a vinyl-coated aluminum panel and dual crosslays. Lower compartments fabricated from diamond-plate aluminum and tubular extrusions, with a stainless steel swivel dump valve.
- Hale pump · dual crosslays
- Vinyl-coated pump panel
- Diamond-plate aluminum compartments
- Tubular extrusion sub-structure
- Stainless swivel dump valve
Chassis: Kenworth T380 tandem-axle
-
Pumpers Kenworth Pumper-Tanker
3,000 Gallon Wet-Side Tanker
Tandem-axle pumper-tanker on a Kenworth, Freightliner, or Peterbilt commercial chassis. High-side compartments with roll-up doors are incorporated into the polypropylene water tank, with heavy-duty aluminum diamond-plate body construction throughout.
- High-side roll-up compartments
- Polypropylene water tank
- Heavy-duty diamond-plate body
- Custom paint & gold leaf
- Full pump panel
Chassis: Kenworth · Freightliner · Peterbilt
-
Features Polished Pump Panel
Polished stainless pump panel with master gauges, individual line gauges, and pre-piped discharge controls, laid out the way a pump operator actually works.
- Polished stainless face
- Master gauges
- Pre-piped discharges
- Color-coded labels
-
Features Rescue Body · Paint
Custom rescue body fresh out of paint, with roll-up door openings cut and prepped and a diamond-plate top deck installed, ready for compartmentation and final assembly.
- Roll-up door openings
- Diamond-plate top deck
- Single-piece body
- Pre-paint prep
-
Features Ladder Storage
Rear vertical ground-ladder storage with a full-height diamond-plate door that keeps roof and attic ladders out of the weather and pulls cleanly with one hand.
- Vertical ladder stow
- Diamond-plate door
- NFPA chevron
- Polished hard-suction brackets
-
Features Rescue Body · Fab
Rescue body shell mid-fabrication on the Triton shop floor, built from single-piece welded aluminum with compartment openings cut and ready for door hardware and electrical rough-in.
- Single-piece weld
- Aluminum body
- Compartment cutouts
- Made in Acworth, GA
-
Features Skid Pump Module
Pre-plumbed skid pump module with Briggs Vanguard engine, brass discharge manifold, pre-connect tap, and electric hose reel that drops onto a flatbed or pickup body for instant quick-attack capability.
- Briggs Vanguard engine
- Pre-plumbed manifold
- Electric hose reel
- Pre-connect discharge
-
Features Chevron Door · Shelving
Walk-around compartment with an NFPA chevron-trimmed door, adjustable aluminum shelving, and a slide-out base tray, with every shelf height built around the actual tool inventory.
- NFPA chevron trim
- Adjustable shelving
- Slide-out tray
- Diamond-plate door face
-
Features Step-Well Compartment
Diamond-plate between-axle step-well compartment that drops down for a stable working step on a tandem-axle apparatus while keeping cribbing, chocks, and short ground tools accessible at ground level.
- Diamond-plate skin
- Drop-down door
- Tandem-axle clearance
- Cribbing storage
No builds in this category yet.
More builds delivered every month. Talk to Triton about a custom apparatus for your department.
-
Phase 1 01Specification & Engineering
We sit down with your apparatus committee, review call profile and tool inventory, and draft a build spec line by line. CAD-rendered compartmentation layouts let you see the finished apparatus before steel is cut.
- ▸ Apparatus committee consult
- ▸ Call profile + tool inventory review
- ▸ NFPA 1901 compliance review
- ▸ CAD compartment & cab layouts
-
Phase 2 02Fabrication & Build
Seagrave construction at the factory or custom fabrication in our shop. Laser-cut stainless and aluminum, in-process inspections, and photo updates so your committee tracks progress in real time.
- ▸ Laser-cut stainless / aluminum body
- ▸ Pre-paint inspection
- ▸ In-process photo updates
- ▸ Mid-build committee visit
-
Phase 3 03Acceptance Testing
Every apparatus is pump-tested, road-tested, and certified to NFPA + UL standards before delivery. Discovery and pre-delivery inspections are scheduled with your committee.
- ▸ UL pump test
- ▸ NFPA 1901 acceptance
- ▸ Pre-delivery inspection
- ▸ Discovery & rework window
-
Phase 4 04Delivery & Training
On-site delivery, crew familiarization training, and a full apparatus walk-through. We don't leave until your team is comfortable operating every system.
- ▸ On-site delivery
- ▸ Crew familiarization
- ▸ Pump panel & system training
- ▸ Documentation & manual handoff
A look around the floor.
Stainless laser cutters, aluminum body fabrication, walk-in rescue assembly — the work that happens before an apparatus rolls.
-
Triton EVS fabrication shop — Acworth, GA -
Industrial laser cutter — precision steel and aluminum cutting -
Custom rescue body under fabrication with welding stations -
Aluminum apparatus body assembly with red trim panels -
Non walk-in rescue body shell during construction -
Triton EVS shop entry -
Exterior view of the Triton EVS fabrication facility
Have a build in mind?
Send us your call profile and tool inventory. We'll come back with a layout that fits.